Local Door Fitting
A door that closes cleanly, seals properly, and meets Building Regulations from day one.
What Goes Wrong
The difference between a door that works for years and one that fails within months comes down to how it was hung.
Hanging a door into an out-of-square frame guarantees binding and gaps, no matter how good the door slab is.
The installer checks for square, level, and structural soundness before the door is ordered or trimmed.
Hinges that sit proud of the timber cause the door to bind on the latch side and wear unevenly over time.
Each hinge is recessed flush so the door hangs true and swings without resistance from the first day.
An external door fitted without perimeter sealing fails Part L thermal requirements and lets cold air straight through.
External doors are sealed around the full frame to meet Part L Building Regulations and eliminate draught gaps.
A latch that does not engage the keep cleanly forces the door and puts stress on the frame over time.
Lock, latch, and handle are fitted and adjusted until the door closes and latches cleanly without force.
Scope of Work
From a single room door to a composite front door, the scope is set out in the written quote before work starts.
Door slab trimmed to the opening, hinges recessed, and latch aligned so the door closes without catching.
Composite, uPVC, or solid wood doors fitted with draught sealing and checked against Part L thermal requirements.
New or replacement frames fitted square and level before the door is hung, preventing binding from the outset.
Handles, latches, locks, and hinges supplied and fitted as part of the job, or customer-supplied hardware installed.
Trimming, hinge adjustment, or frame correction to fix a door that catches, drags, or no longer closes cleanly.
Replacement front doors hung and sealed to spec.
External rear doors fitted with full perimeter sealing.
Internal doors trimmed, hung, and latched cleanly.
Damaged or rotten frames repaired before re-hanging.
Internal & External Doors
Whether it is a room door or a front door, the frame condition determines how well the finished job holds up.
Havering’s mix of post-war semis, newer builds, and older period homes means door openings vary in size, condition, and frame material. Before any door is ordered, the installer checks the frame for square, level, and structural soundness. A frame that is out of true will cause a new door to bind or gap regardless of how carefully it is hung.
Internal doors are trimmed to the opening, hinges are recessed cleanly, and the latch is aligned so the door closes without force. External doors, composite, uPVC, or solid wood, require draught sealing around the full perimeter and must meet Part L thermal performance requirements under Building Regulations. FENSA certification applies to replacement external doors that include glazing.
The installer fits all hardware, checks the lock alignment, and adjusts the door stop before signing off. The written quote covers the door slab, frame repairs if needed, hinges, handle and latch set, and any draught sealing, listed separately so you can see exactly what each element costs before work begins.
Why Choose Us
Every job is arranged through a local installer who surveys the property first and quotes in writing before any work is scheduled.
A local installer visits the property to check the frame before pricing, no guesswork, no surprise additions on the day.
Every cost is listed separately: door slab, frame work, hinges, hardware, and sealing, so you approve each line before work starts.
Installers familiar with Havering’s housing stock handle the varied frame conditions found across the borough’s different property types.
Work is planned to keep time on site short, so a door fitting does not stretch into an unplanned all-day job.
The quote shows whether a repair, re-hang, or full replacement suits the door, you choose with the full picture in front of you.
How It Works
01
Tell us the door type and property, and we arrange a local installer to visit and assess the frame condition on site.
02
You receive an itemised written quote covering all materials, labour, and any frame repairs before a date is booked.
03
The installer hangs, aligns, and seals the door, then tests the close, latch, and lock before leaving the property.
Pricing Estimates
| Job | Typical cost | Typical duration |
|---|---|---|
| uPVC door fitting | £650-£1,200 | Half day |
| Composite door fitting | £900-£1,700 | Half day |
| Patio door installation | £1,200-£2,800 | 1 day |
| French door installation | £1,400-£3,200 | 1 day |
Tell us the door type and we arrange a local installer to survey the frame and return a free itemised quote before anything is ordered.