Glass Replacement
Replace only the glass, keep the frame you have and avoid the cost of a full window swap.
Common Pitfalls
A pane cut even a few millimetres out means the unit will not seat properly, letting in draughts and water.
The installer measures the existing frame opening directly before any glass is ordered, not from a rough estimate.
Fitting standard float glass where toughened or frosted is required creates a safety risk and may not meet building regulations.
The correct glass type, toughened, frosted, or double-glazed sealed unit, is confirmed before the replacement is supplied.
Replacing a misted pane without addressing the failed hermetic seal means the new unit will cloud over again within months.
Misting is caused by a broken seal inside the unit itself; the whole sealed unit is replaced, not just the outer pane.
Forcing out old beads without care splits or warps them, leaving the new pane loose in the frame and vulnerable to rattling.
Beads are removed carefully and refitted, or replaced where damaged, so the new pane sits firm and the perimeter seals cleanly.
Scope of Work
Whether the pane is cracked, misted, or draughty, the work starts with the glass, not the frame.
A failed sealed unit is removed and replaced with a new double-glazed unit matched to the existing frame opening and specification.
Where building regulations require toughened glass, doors, low-level panes, bathrooms, the correct specification is supplied and fitted.
Frosted or obscure panes for bathrooms and side panels are measured, matched to the existing pattern, and fitted into the sound frame.
Cracked or broken single panes in timber or aluminium frames are removed, measured, and reglazed with putty or beads as the frame requires.
Sealed unit swapped within an existing uPVC frame.
New pane bedded in putty or beads in a timber frame.
Glass replaced within an aluminium frame and resealed.
Replace the Glass, Keep the Frame
Misting between the panes is caused by a failed seal in the unit itself, the frame is rarely the problem.
Many properties across Havering carry original or early uPVC frames that are structurally sound but have glazing units that have failed over time. Condensation or misting between the panes means the hermetic seal inside the double-glazed unit has broken down, allowing moisture in. That is a glass fault, not a frame fault, and it is resolved by replacing the sealed unit rather than the whole window.
The installer measures the existing opening precisely, confirms the correct glass type, double-glazed sealed unit, toughened safety glass, or frosted, and removes the old pane by releasing the glazing beads. The new unit is set into the frame, the beads are refitted, and the perimeter is sealed. For rental properties across the borough, a fast glass fix keeps the property habitable without the cost of full window replacement.
Cracked or broken single panes in timber frames follow the same process: measure, match the glass specification, remove the old pane with putty or beads, and bed the new glass in correctly. The written quote covers the glass unit, glazing beads if replacement is needed, and labour, listed separately so you can see the cost of each element before the installer starts.
Why Choose Us
Accountability at every step, from the first site visit to the sealed and cleaned finish.
A local installer visits the property to record frame condition and glazing type before a price is given.
Glass, glazing beads, labour, and waste removal are listed as separate line items so you see exactly what you are paying for.
The quote shows both the glass-only fix and the full-frame option, so you can make an informed decision before work starts.
We connect customers with vetted independent local partners who know the housing stock in this part of the borough.
Work is timed to keep the installer’s time on site short, reducing the window the property is open to the elements.
How It Works
01
Tell us the symptom, misted, cracked, or draughty, and the frame material, and we arrange a local installer to visit.
02
The installer surveys the frame, measures the opening, and returns an itemised quote covering glass, beads, labour, and removal.
03
The correct pane or sealed unit is supplied, fitted into the existing frame, rebeaded, and sealed before the installer leaves.
Pricing Estimates
| Job | Typical cost | Typical duration |
|---|---|---|
| Single pane glass replacement | £55-£150 | 30-60 minutes |
| Standard glass replacement | £55-£300 | 30-90 minutes |
| Double-glazed pane replacement | £100-£250 | 1-2 hours |
| Larger glazed unit replacement | £180-£350 | 1-2 hours |
Tell us the symptoms and the property type. We arrange a local installer to survey the glass, check the frame, and return a written quote before anything is ordered.